OP-2-12V-24V-H 9-22 V Input, 24 V/6 A Output Half-brick

OP-2-12V-24V-H

OP-2-12V-24V-H 9-22 V Input, 24 V/6 A Output Half-brick

Property

Value

Maximum Input Current (Max.)

23.5 A

Maximum Input Current (Notes & Conditions)

Vin min; trim up; in current limit

No-Load Input Current (enabled) (Typ.)

330 mA

No-Load Input Current (enabled) (Max.)

410 mA

Disabled Input Current (Typ.)

2 mA

Disabled Input Current (Max.)

3 mA

Response to Input Transient (Typ.)

0.7 V

Response to Input Transient (Notes & Conditions)

500 V/ms

Input Terminal Ripple Current (Typ.)

360 mA

Input Terminal Ripple Current (Notes & Conditions)

RMS

Recommended Input Fuse (Max.)

30 A

Recommended Input Fuse (Notes & Conditions)

Fast acting fuse recommended

Output Voltage Set Point (Min.)

23.76 V

Output Voltage Set Point (Typ.)

24.00 V

Output Voltage Set Point (Max.)

24.24 V

Total Output Voltage Range (Min.)

23.40 V

Total Output Voltage Range (Max.)

24.60 V

Total Output Voltage Range (Notes & Conditions)

Over sample, line, load, temperature & life

Peak-to-Peak (Typ.)

150 mV

Peak-to-Peak (Max.)

300 mV

Peak-to-Peak (Notes & Conditions)

Full load

RMS (Typ.)

21 mV

RMS (Max.)

40 mV

RMS (Notes & Conditions)

Full load

Operating Output Current Range (Min.)

0 A

Operating Output Current Range (Max.)

6 A

Operating Output Current Range (Notes & Conditions)

Subject to thermal derating

Output DC Current Limit Inception (Min.)

6.6 A

Output DC Current Limit Inception (Typ.)

7.2 A

Output DC Current Limit Inception (Max.)

7.8 A

Output DC Current Limit Inception (Notes & Conditions)

Output voltage 10 % Low

Output DC Current Limit Shutdown Voltage (Typ.)

13 V

Back-Drive Current Limit while Enabled (Typ.)

0.2 A

Back-Drive Current Limit while Enabled (Notes & Conditions)

Negative current drawn into output pins

Back-Drive Current Limit while Disabled (Typ.)

2.5 mA

Back-Drive Current Limit while Disabled (Notes & Conditions)

Negative current drawn into output pins

Maximum Output Capacitance (Max.)

400 uF

Maximum Output Capacitance (Notes & Conditions)

Vout nominal at full load (resistive load)

Step Change in Output Current (0.1 A/ us) (Typ.)

1400 mV

Step Change in Output Current (0.1 A/ us) (Notes & Conditions)

66 % to 100 % to 66 % Iout max

Settling Time (Typ.)

80 us

Settling Time (Notes & Conditions)

To within 1 % Vout nom

Output Voltage Trim Range (Min.)

-20 %

Output Voltage Trim Range (Max.)

10 %

Output Voltage Trim Range (Notes & Conditions)

Across Pins 8 & 4; Common Figures 3-5

Output Voltage Remote Sense Range (Max.)

10 %

Output Voltage Remote Sense Range (Notes & Conditions)

Across Pins 8 & 4

Output Over-Voltage Protection (Min.)

28.1 V

Output Over-Voltage Protection (Typ.)

29.3 V

Output Over-Voltage Protection (Max.)

30.5 V

Output Over-Voltage Protection (Notes & Conditions)

Over full temp range

100 % Load (Typ.)

90 %

100 % Load (Notes & Conditions)

See Figure 1 for efficiency curve

50 % Load (Typ.)

91 %

50 % Load (Notes & Conditions)

See Figure 1 for efficiency curve

Operating Input Voltage Range (Min.)

9 V

Operating Input Voltage Range (Typ.)

12 V

Operating Input Voltage Range (Max.)

22 V

Operating Input Voltage Range (Notes & Conditions)

See Note 1

Turn-On Voltage Threshold (Min.)

9.2 V

Turn-On Voltage Threshold (Typ.)

9.5 V

Turn-On Voltage Threshold (Max.)

9.8 V

Turn-Off Voltage Threshold (Min.)

8.3 V

Turn-Off Voltage Threshold (Typ.)

8.6 V

Turn-Off Voltage Threshold (Max.)

8.9 V

Lockout Voltage Hysteresis (Typ.)

0.9 V

Input Over-Voltage Shutdown (Min.)

32 V

Input Over-Voltage Shutdown (Typ.)

35 V

Recommended External Input Capacitance (Typ.)

820 uF

Recommended External Input Capacitance (Notes & Conditions)

Typical ESR 0.1-0.2 Ω

Input Filter Component Values (LC) (Typ.)

0.3432 uH uF

Input Filter Component Values (LC) (Notes & Conditions)

Internal values

Operating Temperature (Min.)

-40 °C

Operating Temperature (Max.)

100 °C

Operating Temperature (Notes & Conditions)

Baseplate temperature

Storage Temperature (Min.)

-45 °C

Storage Temperature (Max.)

125 °C

Voltage at ON/OFF input pin (Min.)

-2 V

Voltage at ON/OFF input pin (Max.)

18 V

Turn-On Time (Typ.)

10 ms

Turn-On Time (Notes & Conditions)

Full load, Vout = 90 % nom. (from enable)

Start-Up Inhibit Time (Min.)

180 ms

Start-Up Inhibit Time (Typ.)

200 ms

Start-Up Inhibit Time (Max.)

220 ms

Start-Up Inhibit Time (Notes & Conditions)

Figure E

Output Voltage Overshoot (Typ.)

0 %

Output Voltage Overshoot (Notes & Conditions)

Maximum Output Capacitance

Isolation Voltage (dielectric strength) (Notes & Conditions)

See Absolute Maximum Ratings

Isolation Resistance (Typ.)

30 MΩ

Isolation Capacitance (input to output) (Typ.)

1000 pF

Isolation Capacitance (input to output) (Notes & Conditions)

See Note 2

Semiconductor Junction Temperature (Max.)

125 °C

Semiconductor Junction Temperature (Notes & Conditions)

Package rated to 150 °C

PCB Temperature (Max.)

125 °C

PCB Temperature (Notes & Conditions)

UL rated max operating temp 130 °C

Transformer Temperature (Max.)

125 °C

Maximum Baseplate Temperature, Tb (Max.)

100 °C

Switching Frequency (Min.)

255 kHz

Switching Frequency (Typ.)

275 kHz

Switching Frequency (Max.)

295 kHz

Switching Frequency (Notes & Conditions)

Isolation stage switching freq. is half this

Off-State Voltage (Min.)

2.4 V

Off-State Voltage (Max.)

18 V

On-State Voltage (Min.)

-2 V

On-State Voltage (Max.)

0.8 V

Pull-Up Voltage (Typ.)

5 V

Pull-Up Resistance (Typ.)

50 kΩ

Over-Temperature Shutdown OTP Trip Point (Typ.)

125 °C

Over-Temperature Shutdown OTP Trip Point (Notes & Conditions)

Average PCB Temperature

Over-Temperature Shutdown Restart Hysteresis (Typ.)

10 °C

Calculated MTBF (Telcordia) TR-NWT-000332 (Typ.)

1.44 10^6 Hrs.

Calculated MTBF (Telcordia) TR-NWT-000332 (Notes & Conditions)

Tb = 70 °C

Calculated MTBF (MIL-217) MIL-HDBK-217F (Typ.)

1.20 10^6 Hrs.

Calculated MTBF (MIL-217) MIL-HDBK-217F (Notes & Conditions)

Tb = 70 °C

Over Line (Typ.)

+/-0.1 %

Over Line (Max.)

+/-0.3 %

Over Load (Typ.)

+/-0.1 %

Over Load (Max.)

+/-0.3 %

Over Temperature (Min.)

-360 mV

Over Temperature (Max.)

360 mV

Output Voltage Ripple and Noise (Notes & Conditions)

20 MHz bandwidth

Non-Operating (Min.)

-0.5 V

Non-Operating (Max.)

30 V

Non-Operating (Notes & Conditions)

Continuous

Operating (Max.)

22 V

Operating (Notes & Conditions)

Continuous

Operating Transient (Max.)

25 V

Input to Output (Max.)

2250 Vdc

Input to Baseplate (Max.)

2250 Vdc

Output to Baseplate (Max.)

2250 Vdc

ON/OFF Control (Notes & Conditions)

Application notes Figures A & B

Features

High operational efficiency up to 92% with full power delivery and minimal thermal derating.

Versatile 9-22V input voltage range featuring integrated under-voltage lockout and over-voltage shutdown.

Enhanced output regulation including remote sensing, wide-range voltage trimming, and no minimum load requirement.

Comprehensive protection suite covering output over-voltage, current limit, short circuit, and thermal shutdown.

Fixed-frequency switching architecture for predictable EMI performance and active back-drive current limiting.

Industry-standard half-brick footprint available with an optional flanged baseplate for robust mechanical mounting.

Fully certified to UL/CSA/EN 62368-1 safety standards and compliant with RoHS environmental directives.

Applications

Industrial and Transportation applications