OP-4-36V-24V-H 18-75 V Input, 24 V/9 A Output Half-brick

OP-4-36V-24V-H

OP-4-36V-24V-H 18-75 V Input, 24 V/9 A Output Half-brick

Property

Value

Maximum Input Current (Max.)

17.6 A

Maximum Input Current (Notes & Conditions)

Vin min; trim up; in current limit

No-Load Input Current (enabled) (Typ.)

110 mA

No-Load Input Current (enabled) (Max.)

140 mA

Disabled Input Current (Typ.)

2 mA

Disabled Input Current (Max.)

4 mA

Response to Input Transient (Typ.)

1 V

Response to Input Transient (Notes & Conditions)

See Figure 6

Input Terminal Ripple Current (Typ.)

300 mA

Input Terminal Ripple Current (Notes & Conditions)

RMS

Recommended Input Fuse (Max.)

20 A

Recommended Input Fuse (Notes & Conditions)

Fast acting fuse recommended

Output Voltage Set Point (Min.)

23.76 V

Output Voltage Set Point (Typ.)

24.00 V

Output Voltage Set Point (Max.)

24.24 V

Total Output Voltage Range (Min.)

23.40 V

Total Output Voltage Range (Max.)

24.60 V

Total Output Voltage Range (Notes & Conditions)

Over sample, line, load, temperature & life

Operating Output Current Range (Min.)

0 A

Operating Output Current Range (Max.)

9 A

Operating Output Current Range (Notes & Conditions)

Subject to thermal derating

Output DC Current Limit Inception (Min.)

9.9 A

Output DC Current Limit Inception (Typ.)

10.8 A

Output DC Current Limit Inception (Max.)

11.7 A

Output DC Current Limit Inception (Notes & Conditions)

Output voltage 10 % Low

Output DC Current Limit Shutdown Voltage (Typ.)

11 V

Back-Drive Current Limit while Enabled (Typ.)

0.2 A

Back-Drive Current Limit while Enabled (Notes & Conditions)

Negative current drawn into output pins

Back-Drive Current Limit while Disabled (Typ.)

2.5 mA

Back-Drive Current Limit while Disabled (Notes & Conditions)

Negative current drawn into output pins

Maximum Output Capacitance (Max.)

400 uF

Maximum Output Capacitance (Notes & Conditions)

Vout nominal at full load (resistive load)

Output Voltage Trim Range (Min.)

-20 %

Output Voltage Trim Range (Max.)

10 %

Output Voltage Trim Range (Notes & Conditions)

Across Pins 8 & 4; Common Figures 3-5

Output Voltage Remote Sense Range (Max.)

10 %

Output Voltage Remote Sense Range (Notes & Conditions)

Across Pins 8 & 4

Output Over-Voltage Protection (Min.)

28.08 V

Output Over-Voltage Protection (Typ.)

29.28 V

Output Over-Voltage Protection (Max.)

30.48 V

Output Over-Voltage Protection (Notes & Conditions)

Over full temp range

100 % Load (Typ.)

90 %

100 % Load (Notes & Conditions)

See Figure 1 for efficiency curve

50 % Load (Typ.)

93 %

50 % Load (Notes & Conditions)

See Figure 1 for efficiency curve

Operating Input Voltage Range (Min.)

18 V

Operating Input Voltage Range (Typ.)

36 V

Operating Input Voltage Range (Max.)

75 V

Input Over-Voltage Shutdown (Min.)

77 V

Input Over-Voltage Shutdown (Typ.)

80 V

Recommended External Input Capacitance (Typ.)

220 uF

Recommended External Input Capacitance (Notes & Conditions)

Typical ESR 0.1 – 0.2 Ohm

Input Filter Component Values (LC) (Typ.)

1.113.2 uH uF

Input Filter Component Values (LC) (Notes & Conditions)

Internal values

Operating Temperature (Min.)

-40 °C

Operating Temperature (Max.)

100 °C

Operating Temperature (Notes & Conditions)

Baseplate temperature

Storage Temperature (Min.)

-45 °C

Storage Temperature (Max.)

125 °C

Voltage at ON/OFF input pin (Min.)

-2 V

Voltage at ON/OFF input pin (Max.)

18 V

Isolation Voltage (dielectric strength) (Notes & Conditions)

See Absolute Maximum Ratings

Isolation Resistance (Typ.)

30 M Ohm

Isolation Capacitance (input to output) (Typ.)

1000 pF

Isolation Capacitance (input to output) (Notes & Conditions)

See Note 1

Semiconductor Junction Temperature (Max.)

125 °C

Semiconductor Junction Temperature (Notes & Conditions)

Package rated to 150 °C

PCB Temperature (Max.)

125 °C

PCB Temperature (Notes & Conditions)

UL rated max operating temp 130 °C

Transformer Temperature (Max.)

125 °C

Maximum Baseplate Temperature, Tb (Max.)

100 °C

Switching Frequency (Min.)

255 kHz

Switching Frequency (Typ.)

275 kHz

Switching Frequency (Max.)

295 kHz

Switching Frequency (Notes & Conditions)

Isolation stage switching freq. is half this

Over-Temperature Shutdown OTP Trip Point (Typ.)

125 °C

Over-Temperature Shutdown OTP Trip Point (Notes & Conditions)

Average PCB Temperature

Over-Temperature Shutdown Restart Hysteresis (Typ.)

10 °C

Calculated MTBF (Telcordia) TR-NWT-000332 (Typ.)

1.44 10^6 Hrs.

Calculated MTBF (Telcordia) TR-NWT-000332 (Notes & Conditions)

Tb = 70 °C

Calculated MTBF (MIL-217) MIL-HDBK-217F (Typ.)

1.20 10^6 Hrs.

Calculated MTBF (MIL-217) MIL-HDBK-217F (Notes & Conditions)

Tb = 70 °C

Output Voltage Regulation Over Line (Typ.)

+/-0.1 %

Output Voltage Regulation Over Line (Max.)

+/-0.3 %

Output Voltage Regulation Over Load (Typ.)

+/-0.1 %

Output Voltage Regulation Over Load (Max.)

+/-0.3 %

Output Voltage Regulation Over Temperature (Min.)

-360 mV

Output Voltage Regulation Over Temperature (Max.)

360 mV

Output Voltage Ripple and Noise Peak-to-Peak (Typ.)

165 mV

Output Voltage Ripple and Noise Peak-to-Peak (Max.)

330 mV

Output Voltage Ripple and Noise Peak-to-Peak (Notes & Conditions)

20 MHz bandwidth

Output Voltage Ripple and Noise RMS (Typ.)

30 mV

Output Voltage Ripple and Noise RMS (Max.)

60 mV

Output Voltage Ripple and Noise RMS (Notes & Conditions)

Full load

Output Voltage during Load Current Transient Step Change in Output Current (0.1 A/ us) (Typ.)

1300 mV

Output Voltage during Load Current Transient Step Change in Output Current (0.1 A/ us) (Notes & Conditions)

50 % to 75 % to 50 % Iout max

Output Voltage during Load Current Transient Settling Time (Typ.)

100 us

Output Voltage during Load Current Transient Settling Time (Notes & Conditions)

To within 1 % Vout nom

Input Under-Voltage Lockout Turn-On Voltage Threshold (Min.)

17.1 V

Input Under-Voltage Lockout Turn-On Voltage Threshold (Typ.)

17.5 V

Input Under-Voltage Lockout Turn-On Voltage Threshold (Max.)

17.9 V

Input Under-Voltage Lockout Turn-Off Voltage Threshold (Min.)

16.1 V

Input Under-Voltage Lockout Turn-Off Voltage Threshold (Typ.)

16.5 V

Input Under-Voltage Lockout Turn-Off Voltage Threshold (Max.)

16.9 V

Input Under-Voltage Lockout Lockout Voltage Hysteresis (Typ.)

1.0 V

Input Voltage Non-Operating (Min.)

-1 V

Input Voltage Non-Operating (Max.)

80 V

Input Voltage Non-Operating (Notes & Conditions)

Continuous

Input Voltage Operating (Max.)

75 V

Input Voltage Operating (Notes & Conditions)

Continuous

Isolation Voltage Input to Output (Max.)

2250 Vdc

Isolation Voltage Input to Baseplate (Max.)

2250 Vdc

Isolation Voltage Output to Baseplate (Max.)

2250 Vdc

Turn-On Transient Turn-On Time (Typ.)

10 ms

Turn-On Transient Turn-On Time (Notes & Conditions)

Full load, Vout = 90 % nom. (from enable)

Turn-On Transient Start-Up Inhibit Time (Min.)

180 ms

Turn-On Transient Start-Up Inhibit Time (Typ.)

200 ms

Turn-On Transient Start-Up Inhibit Time (Max.)

220 ms

Turn-On Transient Start-Up Inhibit Time (Notes & Conditions)

Figure E

Turn-On Transient Output Voltage Overshoot (Typ.)

0 %

Turn-On Transient Output Voltage Overshoot (Notes & Conditions)

Maximum Output Capacitance

ON/OFF Control Off-State Voltage (Min.)

2.4 V

ON/OFF Control Off-State Voltage (Max.)

18 V

ON/OFF Control On-State Voltage (Min.)

-2 V

ON/OFF Control On-State Voltage (Max.)

0.8 V

ON/OFF Control Pull-Up Voltage (Typ.)

5 V

ON/OFF Control Pull-Up Voltage (Notes & Conditions)

Application notes Figures A & B

ON/OFF Control Pull-Up Resistance (Typ.)

50 k Ohm

Features

High efficiency up to 92% with optimized thermal performance and minimal power derating at full load.

Wide 18-75V input voltage range utilizing fixed-frequency switching for predictable EMI management.

Industry-standard half-brick footprint (2.39" x 2.49" x 0.51") with an optional flanged baseplate for versatile mounting.

Advanced output control featuring remote sensing, wide-range voltage trimming, and no minimum load requirements.

Comprehensive protection suite including input UVLO, output OVP, thermal shutdown, and short-circuit protection.

Fully compliant with UL/CSA/EN 62368-1 (Basic Insulation) safety standards and RoHS directives.

Integrated operational features including active back-drive current limiting and input-referenced On/Off control.

Applications

Industrial and Transportation applications