1 to 52 GHz, Selectable Fixed-Frequency Low Phase Noise Fixed-Frequency Signal Source – OPDRO-140L
- Output frequency range: 1–52 GHz; fixed frequency selected when ordering
- Output power: ≥10 dBm
The OPDRO-140L is a low phase noise fixed-frequency signal source with a fixed output frequency selected within 1 to 52 GHz. Reference frequency: 10 MHz. Output power: ≥10 dBm. Dimensions: 154 × 96 × 33 mm. Operating temperature: -20 to +50 °C.
- Description
- Datasheet
- Reviews (0)
Description
The OPDRO-140L is a low phase noise fixed-frequency signal source with a fixed output frequency selected within 1 to 52 GHz. Reference frequency: 10 MHz. Output power: ≥10 dBm. Dimensions: 154 × 96 × 33 mm. Operating temperature: -20 to +50 °C.
| OPDRO-140L | |
| 1 to 52 GHz, Selectable Fixed-Frequency Low Phase Noise Fixed-Frequency Signal Source – OPDRO-140L | |
| Property | Value |
|---|---|
| Output frequency range | 1–52 GHz; fixed frequency selected when ordering |
| Output power | ≥10 dBm |
| Spurious suppression | ≥70 dBc |
| Harmonic suppression | ≥20 dBc |
| Reference frequency | 10 MHz |
| Reference input power | +5 to +10 dBm |
| Clock output | 100 MHz; ≥0 dBm |
| Clock phase noise | -130/-165/-178/-180/-180 dBc/Hz at 100 Hz offset/1 kHz/10 kHz/100 kHz/1 MHz offsets |
| Supply voltage/current | ≤+12 V / 1.2 A (as specified) |
| Operating temperature | -20 to +50 °C |
| Storage temperature | -55 to +85 °C |
| Dimensions | 154 × 96 × 33 mm |
| Frequency selection | Factory-selected fixed output frequency; not a tunable synthesizer |
| Fractional-frequency components | ≥60 dBc suppression: 1/2 at 16–32 GHz; 1/4, 2/4, 3/4 and 5/4 at 32–52 GHz |
| Phase Noise (dBc/Hz) | |
| 1 GHz | 100 Hz offset: -120; 1 kHz offset: -145; 10 kHz offset: -154; 100 kHz offset: -156; 1 MHz offset: -174 |
| 5 GHz | 100 Hz offset: -105; 1 kHz offset: -131; 10 kHz offset: -138; 100 kHz offset: -139; 1 MHz offset: -152 |
| 10 GHz | 100 Hz offset: -99; 1 kHz offset: -125; 10 kHz offset: -132; 100 kHz offset: -134; 1 MHz offset: -148 |
| 20 GHz | 100 Hz offset: -93; 1 kHz offset: -119; 10 kHz offset: -126; 100 kHz offset: -126; 1 MHz offset: -142 |
| 44 GHz | 100 Hz offset: -86; 1 kHz offset: -112; 10 kHz offset: -119; 100 kHz offset: -119; 1 MHz offset: -135 |
| Features | |
| |
| Specification Notes | |
| Output frequency is set at the factory to a specified value between 1 and 52 GHz and cannot be adjusted after manufacture. The source note states output power is greater than 10 dBm by default, while the specification table states ≥10 dBm. Other output-power requirements must be confirmed when ordering. | |
Reviews
There are no reviews yet.